Advertisement
Home arrow Products arrow Membranes & Coatings
Membranes & Coatings Print E-mail

 

 

Si-Rex 03 by Klaas Coatings is a state of the art wall and façade coating specifically designed for use on concrete and masonry substrates. It uses an advanced silicone resin binder system to deliver a sophisticated mineral matt finish with outstanding performance benefits.

 

Technical Data SheetImage

 

 

MASTERTOP 1110 is a two component, solvent free, water dispersed epoxy coating. It provides a protective coating which is impermeable to liquids, abrasion resistant and easy to clean. As Mastertop 1110 is water based it may be applied to damp substrates.


Technical Data SheetImage

 

 

 

Tamko TWH-1 is a premium quality protection course, 1/8" thick and constructed with a heavyweight TAMKO organic and impregnated with hot asphaltic saturant, then coated on both sides with weathering grade asphalt and surface with mineral granules for superior scuff and abrasion resistance.


Technical Data SheetImage

 

 

Tamko TW-60 is a flexible, self-adhering rubberized asphalt sheet membrane with a polymer film on the surface and a removable treated release film on the adhesive side.

Technical Data SheetImage

 

 

 

ETERNA-SEAL RUBBER PRODUCTS

 

Just Super 7140 

With extremely high tensile strength and elongation, this synthetic liquid rubber is formulated for use on METAL Roofs and areas where excessive movement and traffic may exist. Flame Retardant: Just Super-7140-FM coating is compounded to the same formula requirements of Just Super Eterna Seal with fire resistant additives and is Factory Mutual Approved. 

 

Technical Data Sheet

Just Super 7140

 

Super Seam Sealer 7141

With extremely high tensile strength and elongation, this is a white thixotropic top coat for sloped urethane foam roofs and for use on metal roofs when coating seams, fasteners and protrusions.

 

Technical Data Sheet

 

Off White Base Coat

An economical, easy to apply, liquid rubber base coating for use as a base coat for white top coating.

 

Technical Data Sheet

 

SEBS Rubber Coating 7145

A synthetic rubber liquid membrane coating specially formulated for use on metal roofs and sidewalls such as entrance ways, cement roofs or for aesthetic appearance. Minimum order for colors other than white or gray is 100 gallons. Flame Retardant: Regular is compounded to the same formula requirements of our SEBS Rubber Coating with Fire Resistant Additives and is Factory Mutual Approved.

 

Technical  Data Sheet

 

Clear Rubber: For Skylights 7145-0 

For sealing, rejuvenating, and prolonging the life of translucent panels (skylights) on metal roofs.

 

Technical Data Sheet

 

Rubberized Aluminium Coating 7145-7

Is a bright metallic, non-asphaltic, fibered aluminum coating formulated for a variety of roof surfaces. In addition to the waterproofing protection, heat reflection, and attractive aluminum color. This product has also been specifically designed to withstand fading and will not brown out as often occurs when asphaltic aluminum coatings are exposed to moisture.

 

Technical Data Sheet

 

Black Rubber 7145-9

An easy to apply liquid rubber base coating. Creates a custom made one ply roof system right on the roof, in conjunction with RH 53 Polyester Membrane.

 

Technical Data Sheet

 

Elastomeric Flashing Cement 7174

A trowel grade, elastomeric flashing cement with exceptional workability and sag resistance. A long lasting repair tool for holes, blisters & split seam.

 

Technical Data Sheet

 

Acrylic Elastomeric Coating 8101

An acrylic flexible liquid membrane coating specially formulated for use on concrete block, masonry, stucco, and where aesthetic appearance of the building is desired. The white or pastel colors reflect the sun’s rays and allow the surface to remain cool, thus saving energy.

 

Technical Data Sheet

 

Gray Arcylic Elastomeric Coating 8101-2

An acrylic flexible liquid membrane coating specially formulated for use on concrete block, masonry, stucco, and where aesthetic appearance of the building is desired. The gray color reflects the sun’s rays and allows the surface to remain cool, thus saving energy.

 

Technical Data Sheet 

 

Premium Acrylic Paint 9000

Premium paint is a high grade Acrylic paint formulated for maximum coverage at an economical cost over concrete or stucco. It is formulated to cover in one application at approximately 0.5 gal per sq.ft. This formula is made to cover and adhere to a slightly chalky surface.

 

Technical Data Sheet

 

 

Tru-Ply Primer: Solvent Based 2140

Tru-Ply 2140 Primer is a high solids elastomeric solvent based adhesive designed to provide maximum adhesion and less wrinkling over EPDM.

 

Technical Data Sheet

 

Tru-Ply Primer 2150

Tru-Ply Primer is a high solids acrylic copolymer emulsion designed to provide maximum adhesion of polyester membrane when resurfacing smooth asphalt roofs. This material has excellent wetting characteristics, which assist in achieving complete surface application while maximizing the coverage rate.

 

Technical Data Sheet

 

ALUMINUM PRODUCTS

 

Cool Shield: Fibered 5275

A premium, bright, fibered, heavy duty, spray or brush-applied aluminum roof coating for sloped metal, composition and built up roofs.

 

Technical Data Sheet

 

Energy Saver: Fibered 5180

An economical heavy duty, fibered aluminum roof coating for mobile homes and RV's.

 

Technical Data Sheet

 

 

Tru-Brite: Non Asphaltic Paint 5155

A triple duty, bright, non-asphaltic, non-fibered, rubberized aluminum paint for metal roofs, fences, tanks, road equipment, structural steel, etc. Covers approx. 300 sq. ft. per gallon.

 

Technical Data Sheet

 

 

ETERNA-SEAL ASPHALT PRODUCTS

 

Asphalt Primer 6001

An asphalt based primer for concrete, BUR, and metal roofs. Helps to rejuvenate roofing felts and helps to produce good adhesion prior to the use of other roofing products. Can be applied by brush, roller or spray. Coverage is 100-125 sq. ft. per gallon.

 

Technical Data Sheet

 

Tru-Shield Roof Coating 6129

A heavy duty fibered black asphalt roof coating for application of up to 5 gal. per 100 sq. ft. on sloped roofs. Can be used as an adhesive in conjunction with polyester fabric, glass fabric or roofing felts.

 

Technical Data Sheet

 

 

Leak Patch 6229

A heavy viscosity mastic that is glass fibered, asphalt based, heavy duty, all weather, and trowel applied. A plastic roof cement that effectively repairs holes, blisters, seams, and breaks.

 

Technical Data Sheet

 

SPECIALTY PRODUCTS

 

Rust Remover & Conditioner 600

Effectively conditions rust and corrosion from steel and other metals. Can be brushed or sprayed for quick conversion of rust and corrosion.

 

Technical Data Sheet

 

Duck's Back Waterproofer 5% 2114

A clear water repellant containing a 5% silicone solution that will not change the color of brick, stone or masonry.

 

Technical Data Sheet

 

Tru-Lastic Seam-Sealer Caulk 7175

An elastomeric caulk with excellent adhesion and flexibility. No primer required. Ideal for caulking around windows, vents, gutters, seams, showers, bath tubs, etc., with bead sizes up to 1/4". Colors available: white, gray, and black.

 

Technical Data Sheet

 

Elastomeric Brilliant White Paint 5156-1

A brilliant white elastomeric paint for beautifying most metal surfaces and some single ply systems where a light color may be desired.

 

Technical Data Sheet

 

Polyester Membrane Roofing RH 53

A soft stitchbonded, 100% polyester yarn. A combination of high strength properties with good elongation for excellent thermal stress force accommodations.

 

Technical Data Sheets